When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.

Heartfelt Creations

Collection by Tanya Thompson • Last updated 8 hours ago

10.16k 
Pins
 • 
5.2k 
Followers
Tanya Thompson

Gallery | Elegantly Said

Other Products: Iris cardstock, foam squares, stamp positioner Instructions: Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of dark pink pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold card front. Die cut the gold frame out of the HCD1-7327 Elegant Swirls Gateway Die using the No.2 and No. 3 dies. Adhere the…

Gallery | Royale Gate Clematis

Other Products: Heavy weight white cardstock, Copic Markers: RV10, V15, V12, V01, BVO1, BV13, YG03, YG25, YG17, B00, B01, B04, E50, E53, E33, E35, yellow cardstock, Instructions: Card size: 4 1/4 x 6”. Make card base by placing the outer outline of the Royale Gateway die off the fold at the top of white heavy weight cardstock. Cut a new front using the same die from silver Luxe and from decorative paper. Glue the silver onto card front matching bottom and sides. Glue the decorative paper on…

Scrap Buster Idea Book; cover part 2.

Part 2, as promised. I hope this helps answer some of the questions posted. If there is something I forgot to address (entirely possible) please list it belo...

Gallery | Floral Window

Other Products: Die cutting machine, watercolor markers Instructions: Cut out the white base of the card and fold it to 8' x 5 3/4'. From the paper collection, cut a 7 3/4” x 5 1/4' rectangle and glue to the base. From the white paper, cut out the 4 largest frames from the Eyelet Frame Gateway Die set. Cut out the centers in the frames with smaller and smaller frames from the set. From the white paper from the Regal Lattice Gateway Die set, cut the smallest frame and glue the frame with a…

Gallery | Climbing Clematis Royale

Other Products: White cardstock, Archival Ink Pad-Violet, Big-Shot Machine, Gold Beads. Instructions: Card final size is 6 3/4” x 5 1/4” (tent fold card). Cut shaped card base. Cut one decorative die of HCD2-7350 Royal Gateway Die on white cardstock and the base die on pattern paper, distress the edges and adhere both the layers on the card base using Designer Dries Clear Adhesive, as shown. Stamp one image from HCPC-3955 Clematis Spray Cling Stamp Set on white cardstock, cut it with…

Gallery | Special Day Clematis

Other Products: Smooth White Cardstock, Heat Tool, Die Cutting Machine, Score Board, Funnel Tray, Bone Folder, Foam Tapes. Instructions: The ready top fold card measures 8' by 6'. To prepare the white card base, cut one piece measuring 8' by 6' and the second piece 8 1/2' by 6'. Score the second piece at 1/2' on the longer side and glue the first piece on top. For the topmost layer, choose the pattern paper from the paper collection and cut 71/4' by 5 1/4' and distress the edges using sharp…

Gallery | Twisted Easel Clematis

Other Products: Stamping Up water colour pencils:-Gorgeous Grape, Garden Green, Razzleberry, Early Espresso, Daffodil Delight, Old Olive. Other: Double sided tape, Double sided foam Tape, Hot glue Gun, Fussy cutting scissors, Glitter, Pattern making tracing tool, Ruler. Instructions: This is a twisted triangle easel card, 6“ x 6“. Using the white card stock to make the card base by cutting this to 12' x 6', make the fold at 6 “. Make a diagonal fold from the card front from the left foot…

Gallery | Uncaged

Other Products: Diecutting machine, White Cardstock, Hot glue Gun, Misti, Watercolor Paper, Dimensional Dots, Instructions: Card size is 4 x 6 1/4”. Create a 4 1/4 x 5” card base, place the outside Decorative Cage Die about 7/8” over the fold of the card and diecut. Using the same die, cut from white cardstock and adhere to the card front. Cut two pieces of the Climbing Clematis Paper Collection using the same die. Ink the edges of both using Deep Purple ink. Trim one to fit the inside of…

Gallery | Missing You Clematis

Other Products: Die cutting machine Cut’n’boss, heat gun, water mister, hot glue gun, hot glue, scissors, sewing thread, cheesecloth, stampin’pen chocolate, Strathmore watercolor paper, Instructions: The finished card measure 7 x 6 inches. Cut a piece of white deluxe flower shaping paper 12 x 7 inches and score at 6 inches to make a side fold card base. Cut 1 piece of paper 5 5/8 x 6 5/8 inches in sheet #1B. Cut 1 piece of paper 5 1/4 x 6 1/4 inches in white cardstock. Cut 1 piece of paper 5…

Gallery | Scenic Floral

Other Products: Foam pads, Copic Y35, RV11, YG03, YG63, versafine clair black ink, clear embossing powder, pink ribbon Instructions: Remove one of the panels from the card base. Die cut the largest solid shape from the gateway die using pink paper from the collection and edge with rose bud memento ink. Adhere to the card base. Die cut the decorative die from the gateway set using coordinating paper from the collection and use the next size die to create an aperture. Select a scene panel from…

Gallery | Thankful Clematis

Other Products: White Cardstock, black embossing powder, pigment ink, heat gun, foam tape Instructions: Create a 5 x 7 inch card base. Cut a piece of purple cardstock from the Climbing Clematis Paper Collection 4.5 x 6.5”, distress with Vibrant Violet and adhere. Cut the fence from the paper collection, slightly smaller than the purple matt, distress with Vibrant Violet and adhere to card front. Cut out the frame with the Ironwork Sentiments Die in white cardstock, distress with Vibrant…

Gallery | Home Tweet Home

Other Products: Cardstock- White, Water brush, Stampin Up Ink- Elegant Eggplant, Pearls, Scrapbook Adhesives by 3L (Crafty Foam Tape, E-Z Runner Ultra, Dual Tip Glue Pen, 3d Foam Squares) Instructions: Cut a white cardstock card base that is 5 x 7” (10 x 7” folded). Die cut the largest of frame layers from green patterned paper, cut the other layers used all from white cardstock. Stamp the sentiment to the smallest layer using brown ink (Staz On- Timber Brown). Adhere these layers to the…

Gallery | Clematis Envelope Card

Other Products: Foam tape, white embossing powder, vellum cardstock, scoreboard, round corner punch. Instructions: Create a card base of size 6 by 8” and mat pattern papers from the climbing clematis paper collection. Cut the decorative border from the starry night die set and glue on the card base. Take a 5 by 5” piece of pattern paper and create a mini envelope using a scoreboard or an envelope punch board. Adhere the prepared envelope on the card using foam tape. Stamp the flowers from…

Gallery | Lattice Birthday Clematis

Other Products: Smooth White Cardstock, Dimensional Tape, Hot Glue Instructions: Ready side fold card measures 6.25” × 8”. Take a piece of designer paper measuring 6” × 7.75' and adhere it on ready card base. Further, cut another designer paper measuring 5.5” × 7.25' and mat it on white cardstock which is 1/8 of an inch bigger from all four sides. Adhere it on card using dimensional tape. Cut white cardstock using Teardrop Lattice Gateway Die and glue it on card using dimensional tape as…

Gallery | Butterfly Fridge Magnet

Other Products: White Cardstock, Die Cut Machine, Scor-Tape, Purple Ribbon, White Embossing Powder, Heat Gun, Magnet, ColorBox Frost White Pigment Ink Instructions: Using white cardstock, die cut the center of the Rounded Window Frame Die. Using the circle die, cut out a piece of the paper collection. I chose sheet 9A which is blue. Glue to the Window Frame Die and set aside. Stamp the Clematis Trellis using Rich Cocoa Ink. Color in the flowers using Majestic Violet ink and a dauber. Cut out…

Gallery | Butterfly Birthday

Other Products: White cardstock, Shimmer additive, Acrylic yellow dots, pearls, Copic Markers: V01, V12, V15, V17, Y11, Y15 Instructions: Card size: 4 3/4 x 7 1/8”. Side fold. Place die on a piece of White cardstock folded to 5 x 7 1/2' with the left side hanging over the edge just past cutting edge to get as full as possible to card size. Cut another front to get complete shape then glue it to the card base. From decorative lavender papercut the decorative inside with the outer edge outline…